1. Here are the materials you’ll need:Piece of wood (approx. 5” x 9” x 2”) (1) 3 foot ½” copper pipe (cut to 1...

2. Start by sanding down the piece of wood to a smooth finish. Wipe off all the sawdust and apply a stain of your choice using a foam applicator or...

3. Measure and mark a spot 1-½" from the center of the shorter edge of the wood base. Use a 3/4" spade bit to drill almost all the...

4. If you're using an extension cord like I did, start by cutting off the end using your wire cutters. Don't cut of the end that plugs into the wal...

5. You need 4 sections of copper pipe: 15", 6", 2-1/2" and 2". Measure and mark the lengths and use a small pipe cutter to cut...

6. Thread all the pieces onto the wire and push the pieces together. Start from the longest pipe to the shortest, inserting an elbow in between eac...

7. I started by taking apart the lamp socket and spraying the brass pieces with some copper spray paint to match the copper pipes.You will notice 2...

8. To finish off, I used some Weldbond to glue all the parts together. Let it dry as per the instructions, then add the light bulb of your choice....