He managed to get an ATmega1284 to output a stable VGA signal. Anyone who’s looked into the VGA standard will know that this is quite an accomplishment. That’s because VGA is all about timing ...

HDMI cables also have a maximum length of about 15 meters, after which the signal quality may degrade. VGA stands for Video Graphics Array, and it is an analog cable that can only carry video signals.

Users can read through our article about how to fix DisplayPort to VGA Adapter not working / no signal. There are many other causes of the VGA audio not working in Windows 10/11. However, the above ...

I previously built a massive 7400-logic based VGA generator called Vectron VGA. While it was a nice project to build, it is huge, and not very practical to keep around for use in lots of other ...

Like other types of component analog video (CAV), RGBHV splits a video signal into multiple channels. Although RGBHV uses high bandwidths, there is no compression. VGA cables also support VESA DDC ...

I am trying to achieve a VGA splitter (using THS7316) on our baseboard. We are using this for a VGA signal with a fixed resolution of 1024 x 768 @ 60Hz and connect to a display panel and a monitor.

Whereas the VGA standard defines the RGB signals along with a VSYNC and HSYNC signal, the Apple version can generate HSYNC, VSYC, but also CSYNC (composite sync). Which sync signal is generated ...

Figure 1. Schematic for 45-m VGA cable equalizer (single channel). Figure 2 shows the large-signal frequency response of a 45-m VGA cable, the equalizer, and the equalizer/cable combination. In ...

(1) A monitor that accepts a digital signal from the computer. Most computer monitors today are digital but may also have an optional input that accepts analog signals from a VGA graphics card ...

This small Video-to VGA converter project is specially made for the QL signal and translates the 512x256 pixel screen to a standard pseudo-XGA resolution (1024x768 with a single QL pixel translating ...

For this example a PCS-CDMA signal was selected, using a 1-MHz noise bandwidth. Working backwards from the output of the AD8367 IF VGA, the input sensitivity and dynamic range can be analyzed. Figure ...

We are having an issue with putting a VGA signal into the TVP7002 on our custom board. The DM8168 captures the synch, but the colors are redish. To achieve white, the VGA input needs to be R=128, ...